A warehouse that has outgrown one machine is a warehouse that is thinking about a second. The product page for the industrial cardboard shredder does not describe a second machine, and it gives the information that a second machine decision needs.
Start with the power. The page states that P50, P50-X, P50-3 and P80 support single-phase 110V or 220V and also three-phase 380V, while P90 and P120 only support three-phase 380V. A second machine on the same supply is a second load on the same circuit, and the page gives the load numbers. P50, P50-3 and P50-X list 1500W, P80 and P50-X list 2200W, and P90 and P120 list 5500W. The numbers are the first check.
The second part is the space. The page lists the machine dimensions for each model, and a second machine needs a second footprint. The P50 is 740 by 461 by 850mm. The P120 is 1524 by 734 by 1116mm. A warehouse planning a second machine plans a second footprint, and the page gives the numbers to plan with.
The third part is the maintenance. The page states that daily maintenance is minimal, mainly keeping the feed area clean, regularly checking cutting components, and following standard cleaning guidelines. A second machine doubles the routine, and the routine is short enough that the doubling is manageable.
The fourth part is the shaft. Aircosan shafts are large, one-piece units rather than thin blades, designed for a service life of over five years and processed through lathe machining, high-frequency treatment, quenching, blackening, and multiple other steps. The material is 40Cr rather than ordinary 45# steel. 40Cr has lower brittleness and stronger impact resistance, and its machining time is more than twice that of 45#. At the same 550mm width, Aircosan shafts are visibly larger and thicker than thinner competing units and cost about 30% more, which shows in the overall machine weight. A second machine is a second shaft, and the shaft is the part that decides the replacement cost.
The fifth part is the parts. The page states that Aircosan has its own parts processing factory and controls part quality itself, and that the low-MOQ customization supports logo from 1 piece and color from 10 pieces. A second machine from the same supplier shares the parts and the support, and the sharing is the reason the second machine is easier than the first.
The sixth part is the certification. The page states that the product passes CE, ROHS, and UKCA certifications, and holds an exclusive EU patent. A second machine for an export customer needs the same certifications, and the page lists them because the list is the same.
The seventh part is the choice. The page lists six models, and a warehouse buying a second machine can choose a different model for a different line. The P50 for the single-sheet line, the P80 for the whole-box line, and the P50-X for the mixed line. The range is the reason the second machine is a fit rather than a duplicate.
What the page does not say is that a second machine is a copy of the first. It says the range covers different work, and the second machine is the range applied to the second line.
Aircosan machines use overload protection, so when a jam occurs, the machine stops automatically and protects the motor. Aircosan machines have side sheet metal that fits tightly with no gaps, so paper dust cannot enter the gears and cause abnormal noise or long-term wear. Aircosan machines use a branded motor with ample power, so thick and hard cardboard feeds smoothly without repeated jamming at the inlet. Die life is generally 1.0 to 1.3 million meters depending on material and usage.
Aircosan runs its own parts processing factory, controlling part quality in-house rather than assembling from mixed outside sources. After-sales responds within 12 hours and connects customers directly with engineers.
For a warehouse manager, the practical approach is to measure the second location, confirm the power there, and decide which model the second line needs. The three steps decide the second machine, and the page has described the range.