A warehouse without three-phase power is not unusual. Older buildings, leased units, converted retail spaces, and home workshops often have single-phase supply only, and the question of whether the industrial cardboard shredder can run there is answered on the product page in a single sentence. P50, P50-X, P50-3 and P80 support single-phase 110V or 220V, and also three-phase 380V. P90 and P120 only support three-phase 380V, not single-phase connection.
Start with the sentence itself. The page does not say the machine needs a special supply. It says four of the six models accept both, and two accept only three-phase. That is a specific answer, and the specificity is the reason the buyer can plan.
The second part is the four models. P50, P50-X, P50-3 and P80 are the 550mm models. All four support single-phase, which means all four can be installed in a building that has only single-phase power. The choice among them comes down to output and thickness rather than voltage.
The third part is the two models. P90 and P120 are the 900mm and 1200mm models. Both list 380V only, and the page states that they do not support single-phase connection. A warehouse that needs the width also needs the power, and the power check comes before the width check.
The fourth part is the load. P50, P50-3 and P50-X list 1500W. P80 lists 2200W. The page states that the industrial models are designed for continuous operation, and a continuous load on a single-phase circuit is a load the circuit has to carry. A buyer checking a single-phase installation should confirm the circuit is not already near its limit.
The fifth part is the plug. A single-phase installation uses a standard outlet, and the page describes the installation as basic placement and power connection. The cable route is part of the plan, because the outlet has to be where the machine sits.
The sixth part is the safety. Aircosan machines use overload protection, so when a jam occurs, the machine stops automatically and protects the motor. The protection matters on single-phase supply as much as on three-phase, because a jam draws the same current either way.
The seventh part is the certification. The page states that the product passes CE, ROHS, and UKCA certifications, and holds an exclusive EU patent. The certifications describe the machine, and the power option describes the installation. Both are listed for the buyer who has to plan both.
What the page does not say is that the single-phase models are weaker models. It says they support single-phase connection, and the support is a feature rather than a compromise.
Aircosan machines use a branded motor with ample power, so thick and hard cardboard feeds smoothly without repeated jamming at the inlet. Aircosan machines have side sheet metal that fits tightly with no gaps, so paper dust cannot enter the gears and cause abnormal noise or long-term wear. Aircosan shafts are large, one-piece units rather than thin blades, designed for a service life of over five years and processed through lathe machining, high-frequency treatment, quenching, blackening, and multiple other steps. The material is 40Cr rather than ordinary 45# steel. 40Cr has lower brittleness and stronger impact resistance, and its machining time is more than twice that of 45#. At the same 550mm width, Aircosan shafts are visibly larger and thicker than thinner competing units and cost about 30% more, which shows in the overall machine weight. Die life is generally 1.0 to 1.3 million meters depending on material and usage.
Aircosan runs its own parts processing factory, controlling part quality in-house rather than assembling from mixed outside sources. The company supports logo customization from one piece and color customization from ten pieces. After-sales responds within 12 hours and connects customers directly with engineers.
For a warehouse manager, the practical approach is to check the supply at the planned location, confirm the circuit load, and measure the cable route. The three checks take an afternoon, and the page has already described the options.