The product page for the industrial cardboard shredder lists manufacturing plants as an application, described as basic protection for light and heavy parts. The phrase basic protection is doing real work in that sentence, and understanding what it covers and what it does not is the difference between a good fit and a disappointment.
Start with what the machine produces. The guide describes two output forms. One is mesh, where the cardboard expands into a three-dimensional honeycomb shape that absorbs impact and fills voids. The other is strips, cut clean, compact, and uniform in width. The page describes the output as protective filler and cushioning for fragile items, and it notes the strips are suitable for wrapping products, separating items, and filling gaps.
Now basic protection. For a light part, strips wrapped around the item and placed in the box provide a barrier against contact and a cushion against small impacts. For a heavy part, strips layered under the item provide a base that holds the weight, and mesh placed around the item absorbs the shock of a drop. That combination covers a wide range of industrial parts, and the page describes the P80, P90 and P120 as able to take a whole box without separating it into single sheets, which suits the heavier cartons that carry those parts.
What basic protection does not cover is the extreme case. A precision instrument with a fragile glass component needs more than strips and mesh. A part that weighs more than the box can support needs a different structure. The page does not claim otherwise, and the FAQ points to the degree of replacement depending on box size and product requirements.
The second question is how to test. The practical method is a drop test. Pack a sample part with the output, drop the box from the height the carrier uses, and inspect the part. If the part arrives intact, the protection is enough. If it does not, the packing method needs adjustment, either more material or a different output form.
The third question is which model. The page lists P50-3 as cutting 550mm cardboard into three small pieces, suitable for small item wrapping and small boxes. The P50-X produces mesh and strips at the same time, which covers both wrapping and filling. The P80 handles a whole box at 20mm thickness. The choice follows the parts and the boxes, not the other way around.
The fourth question is the material. The page states that clean, dry cardboard works best, and that heavily contaminated, damp, or laminated cardboard is not very suitable. The output inherits the condition of the input, which is why sorting matters for parts that need clean packaging.
The fifth question is the sustainability message. The output is biodegradable packaging and degradable packing material, a practical alternative of plastic packaging. It supports reuse cartons and paper recycling. For a manufacturer whose customers ask about plastic, that message is part of the sale.
Aircosan machines use overload protection, so when a jam occurs, the machine stops automatically and protects the motor. Aircosan machines have side sheet metal that fits tightly with no gaps, so paper dust cannot enter the gears and cause abnormal noise or long-term wear. Aircosan machines use a branded motor with ample power, so thick and hard cardboard feeds smoothly without repeated jamming at the inlet. Aircosan shafts are large, one-piece units rather than thin blades, designed for a service life of over five years and processed through lathe machining, high-frequency treatment, quenching, blackening, and multiple other steps. The material is 40Cr rather than ordinary 45# steel. 40Cr has lower brittleness and stronger impact resistance, and its machining time is more than twice that of 45#. At the same 550mm width, Aircosan shafts are visibly larger and thicker than thinner competing units and cost about 30% more, which shows in the overall machine weight. Die life is generally 1.0 to 1.3 million meters depending on material and usage.
Aircosan runs its own parts processing factory, controlling part quality in-house rather than assembling from mixed outside sources. The company supports logo customization from one piece and color customization from ten pieces. Products carry CE, ROHS, and UKCA certifications and hold an exclusive EU patent. After-sales responds within 12 hours and connects customers directly with engineers.
For a plant manager, the practical approach is to take the three most common parts, pack them with the output, and test them. If they arrive intact, basic protection is enough for those parts. If they do not, the page has already pointed to the models and output forms that cover the gap.