Installation is the step between delivery and production. Most buyers focus on the machine's specifications and overlook the environment where the machine will sit. The environment determines whether the installation goes smoothly and whether the machine performs as expected once it is running.
The requirements for a honeycomb paper machine are modest compared with larger industrial equipment. But they are specific, and checking them before delivery avoids the situation where the machine arrives and cannot be placed.
Floor Level and Load
The first requirement is a level floor. The machine's frame is designed to sit flat, and an uneven floor causes the frame to twist. A twisted frame affects the alignment between the shaft and the die holder, and the misalignment shows up as inconsistent output.
The second requirement is floor load. The machine's net weight is 502kg, with a gross weight of 552kg. The floor should be able to support that weight without deflection. A standard concrete floor in a warehouse or packing area meets the requirement. A raised floor or a mezzanine may not, and the floor should be checked before delivery.
Space Around the Machine
The third requirement is space around the machine. The machine's dimensions are 950x1150x1260mm, and the footprint is just over 1 cubic meter. But the machine needs space for the operator, the paper roll, and the output.
The operator needs to stand beside the machine, reach the controls, and feed the paper. The paper roll needs to be stored within a few steps of the machine. The output needs a clear path to the packing bench. A compact footprint fits the machine itself, and the surrounding space is what makes the machine usable.
Power Supply
The fourth requirement is power. The machine runs on standard AC220V/50HZ at 1.5kW total power, with no compressor, heating element, or adhesive system. A standard wall circuit is sufficient, and no dedicated circuit or special installation is needed.
The power supply should be checked before delivery. A circuit that is already loaded with other equipment may not have capacity for the machine. A circuit that is dedicated to the machine is the safest configuration.
Ventilation and Lighting
The fifth requirement is ventilation. The machine does not generate heat or fumes, but the paper dust from the cutting process needs to be managed. A machine with tight side sheet metal keeps most of the dust inside, but some dust escapes. A well-ventilated area keeps the dust from accumulating.
The sixth requirement is lighting. The operator needs to see the output to perform the visual inspection. A packing area with adequate lighting makes the inspection straightforward. A dimly lit area makes the inspection difficult, and the difficulty shows up as missed defects.
What the Machine Delivers
A honeycomb paper machine installed in the right environment delivers consistent output from the first shift. Die-cutting speed is adjustable between 5 and 18 m/min, and die-cutting width is adjustable between 200 and 500mm. Suitable paper is ≤80gsm, and both virgin kraft paper and recycled paper work.
A paper roll length of about 1700m, with a maximum unwind diameter of 500mm and a paper core inner diameter of 75mm, supports a long production run before the roll needs to be changed. A die that lasts about 1.0~1.3 million meters keeps the cells uniform across the entire run.
The output from a honeycomb paper machine is biodegradable packaging and degradable packing material, a practical alternative to plastic packing materials, and it supports reuse cartons and paper recycling. Checking the installation environment before delivery is what makes that output available on schedule.