Most discussions of cardboard shredders treat "cardboard" as a single input. It is not. The board that arrives inside an e-commerce parcel and the board that wraps a piece of industrial equipment are different materials with different fiber content, different flute structures and very different behavior under load.
Single-wall board is two linerboards with one flute between them, typically 3–5 mm thick. It is light, it compresses easily, and it is what most parcels are made of. Shredded into mesh, it produces cushioning suitable for light items cosmetics, small electronics, clothing where the protection requirement is modest. It is not suitable for heavy goods because it collapses under sustained compression.
Double-wall board is three linerboards with two flutes, typically 6–10 mm. This is the grade used for appliances, furniture and mid-weight industrial goods. Shredded into mesh, it holds its expanded structure under load and wraps around irregular shapes without flattening. For most packaging applications this is the sweet spot: heavy enough to protect, light enough to process at speed.
Triple-wall board is four linerboards with three flutes, 15 mm and above. It is used for equipment crates, machinery, and anything where the packaging must survive forklift handling and stacking. This is the grade that most facilities bale and sell cheaply, because it takes up space and has no obvious second use. It is also the grade that produces the most durable mesh cushioning, capable of protecting engine components, machined parts and heavy industrial goods.
The gap between what heavy board can do and what thin board can do is the reason thickness capacity matters. A machine rated to 10 mm cannot process triple-wall stock without straining the shaft, and a facility that generates heavy board but buys a light-duty machine sends that fraction back to the baler. The heavy board then leaves as scrap while the same facility purchases foam or bubble wrap to protect the heavy goods that the heavy board could have protected.
Aircosan's thickness ratings step up across the range. Desktop units P10, P20, P30 and their strip equivalents handle up to 10 mm, which covers single-wall and light double-wall. The P50 and PT50 reach 15 mm. The P80, P90 and P120 handle 20 mm, which covers triple-wall and the heaviest appliance and equipment stock. The P80 runs at 15 m/min with a 55 cm width, the P90 widens to 90 cm at 12 m/min, and the P120 reaches 120 cm at 12 m/min.
Width and thickness interact in a way that buyers should understand. Long shafts carrying heavy board experience more torsional load than short shafts carrying light board. Controlling that requires machined shafts with verified straightness and balanced rotation, which is why Aircosan machines cutting shafts from 40Cr steel blank through rough turning, precision grinding and dynamic balancing in its Dongguan factory, using four CNC machining centers, fourteen lathes and six gear hobbing machines. The P120's 120 cm working width currently the widest on the market is only practical because that machining capability exists in-house.
The practical advice follows. Sort board by grade at unpacking. Keep clean heavy board in one stack near the shredder. Feed the light fraction to a light-duty machine and the heavy fraction to one rated for it. The cushioning quality difference between the two is not marginal. It is the difference between packaging that survives a multi-drop delivery and packaging that arrives compressed flat.