Buying a cardboard shredder looks like a simple procurement decision. It is not. The machine either becomes a daily workhorse at the packing bench or it ends up in a corner because it could not handle the board the facility actually generates. The difference is usually decided by specifications that do not appear in the headline price.


Question one: what is the widest flattened carton in your building? This is the single most important number, and it is the one buyers most often skip. Measure the largest sheet that comes through, not the average box. A furniture delivery depot routinely handles side panels over 80 cm. A glass packaging operation may see boards wider still. If the shredder's feed opening is narrower than that number, every oversized sheet requires manual cutting first, and the labor saved by shredding evaporates. Aircosan's model range runs from the desktop P10 at 35 cm and P20 at 45 cm, through the P30 and P50 at 55 cm, up to the industrial P90 at 90 cm and P120 at 120 cm. The P120 is currently the widest working width available on the market, and it exists because enough buyers asked the first question honestly and found that nothing smaller fit their material.


Question two: how thick is the board? Thickness determines which grades the machine can process without straining the shaft. Single-wall e-commerce board is typically 3–5 mm. Double-wall runs 6–10 mm. Triple-wall and heavy appliance cartons reach 15 mm and beyond. Aircosan's desktop units handle up to 10 mm, the P50 and PT50 reach 15 mm, and the P80, P90 and P120 handle 20 mm. If a facility generates heavy board and buys a machine rated for 10 mm, the heavy fraction goes back to the baler and the machine underperforms its purchase price.


Question three: mesh or strips? The two output formats serve different jobs. Mesh is an expanded three-dimensional pattern that wraps around irregular shapes and replaces bubble wrap for fragile or heavy items. Strips are long, flat and suited to edge protection, gap filling and separating stacked goods. Some applications need both. Aircosan's P50-X produces mesh and strip from the same machine, which suits general packing lines handling mixed outbound goods. The PT series, from PT10 to PT50, is dedicated strip output for operations that have standardized on wrapping rather than void fill.


Question four: how many packing benches need feeding? Throughput is not only about meters per minute. The P50-3 takes one sheet and splits it into three equal mesh streams at 18 m/min, which changes the arithmetic for facilities running multiple benches from one machine. Three operators can be supplied without a queue forming, and the machine's output per sheet triples without any increase in feed labor.


Question five: who maintains it? A shredder's cutting head is a wear item. Perforating pins dull, shafts need alignment, and a machine with no service path becomes a liability. Aircosan machines its cutting shafts and perforating heads in its own factory, from 40Cr steel blank through rough turning, precision grinding and dynamic balancing, using four CNC machining centers, fourteen lathes and six gear hobbing machines. That in-house capability is not a marketing point. It is what allows replacement parts to be supplied to the original specification years after purchase, and it is why the model range could be extended to 120 cm in the first place — long shafts amplify any parallelism error, and controlling that requires machining capability rather than assembly capability.


Question six: what does the material actually cost? This one reframes the purchase. The machine is a capital cost paid once. The material is waste already on site, so the marginal cost per cubic meter of cushioning is electricity and operator time. Compared with purchased bubble wrap or air pillows, the saving compounds monthly. Buyers who run the payback calculation usually find the period short enough that the decision does not need a formal business case — provided the first five questions were answered correctly.


The pattern across all six is the same. The specification that matters is the one that matches the material the facility actually handles, not the one that looks best on a comparison sheet. A shredder sized correctly gets used every shift. A shredder sized to the average rather than the maximum sits idle whenever the large cartons arrive, and in most facilities the large cartons arrive every day.