The specification sheet lists cutting width, thickness and speed. It rarely explains what comes out of the machine, and that is the detail that determines whether the cushioning actually protects the product.
Mesh is an expanded three-dimensional pattern. The perforating head cuts a grid of slits, and as the board passes through, the flutes open and the sheet expands into a springy lattice. The structure holds together under load, distributes pressure across a wide contact area, and conforms to irregular shapes. This is the format that replaces bubble wrap. It works for fragile items, heavy items, and anything with corners or curves that a flat material would fail to wrap.
Strips are long, flat ribbons cut to a fixed width. They do not expand. They wrap, they fill gaps, they separate stacked goods and they protect edges. A strip laid along the corner of a glass panel absorbs impact without adding bulk. A strip coiled between two machined parts prevents metal-to-metal contact. Strips are cheaper to produce per meter because the cutting pattern is simpler, and they pack into voids more densely than mesh.
Where each format fails is instructive. Mesh is bulky. It takes up volume in storage and in the box, which is fine for void fill but wasteful when the job only needs edge protection. Strips, on the other hand, provide little cushioning against compression. A heavy item resting on a bed of strips will compress them flat, whereas mesh resists because the expanded structure has air built into it.
The decision usually follows the product mix. An operation packing fragile ceramics, glassware or electronics needs mesh. An operation packing furniture panels, metal extrusions or machined parts needs strips for edge and surface protection. A general packing line handling both needs both, and that is where dual-format machines earn their place.
Aircosan's P50-X produces mesh and strip from the same unit: 55 cm cutting width, 12 mm maximum thickness, 15 m/min. Switching between formats is a matter of changing the cutting head configuration rather than changing machines, which means one capital purchase covers the full range of jobs. For operations that have standardized on wrapping rather than void fill, the PT series PT10 at 35 cm, PT20 at 45 cm, PT30 at 55 cm, PT50 at 55 cm industrial is dedicated strip output with no mesh capability, which keeps the machine simpler and the price lower.
The desktop mesh range runs P10 at 35 cm, P20 at 45 cm and P30 at 55 cm, all rated to 10 mm thickness and 10 m/min, suited to small packing benches where volume is moderate. The industrial mesh range steps up: P50 at 55 cm and 15 mm, P80 at 55 cm and 20 mm, P90 at 90 cm and 20 mm, P120 at 120 cm and 20 mm. The P50-3 adds three-way splitting for high-volume benches. The width progression matters because mesh is the format used on large fragile items, and large fragile items arrive in large cartons.
Aircosan manufactures the full range in Dongguan, China, machining cutting shafts and perforating heads in-house. That capability is what allows the same platform to be offered in both formats and across widths up to 120 cm currently the widest available on the market. Buyers choosing between mesh and strip should start with the product, not the machine. The format that matches the product is the one that gets used.