The guide on the industrial cardboard shredder page describes the output use in a sentence that sounds general and is actually careful. The processed material has wide uses. Mesh cardboard is generally used as filler to prevent items from shifting during transport; strip cardboard can wrap products or be placed between items as separation. That sentence describes two output forms and three uses, and the phrasing tells the buyer how to read it.
Start with the word generally. The page does not say mesh is always used as filler, or that strips are always used for wrapping. The word generally leaves room for the operation to decide. That is not vagueness. It is a description of a material that has more than one use, and the page is telling the buyer to test the output against the products rather than against the sentence.
The first use is filler. Mesh is described as preventing items from shifting during transport, which is the volume use. A carton with empty space around the product is a carton that lets the product move, and mesh fills that space. The page notes that mesh is a three-dimensional honeycomb shape that absorbs impact and fills voids, which is the property that makes it work as filler.
The second use is wrapping. Strips are described as wrapping products, which is the surface use. A product with a finished surface needs a barrier, and strips provide that barrier without adding much thickness. The page notes that strips are clean, compact, and uniform in width, which is the property that makes them easy to wrap.
The third use is separation. Strips are described as being placed between items, which is the spacing use. A multi-item order needs separation, and strips provide that separation because they are dense and hold position.
The fourth use is the one the page adds in the next sentence. Some models support both outputs, cut strips when wrapping is needed, produce mesh when filling gaps is needed. One machine covers two common needs and is more flexible for workstations with more varied packaging content. That sentence is the description of the P50-X, and it tells the buyer that the choice between mesh and strips is not always a choice between machines.
The fifth use is the one the page adds for the P50-3. Some models also support cutting one sheet of cardboard into three specified-size pieces at once, very practical in scenarios that need fixed material distribution and portioned use, with uniform output specs and easier control of subsequent packaging. That sentence describes a use that the other models do not cover, and it is the reason the P50-3 exists as a separate model.
The sixth use is the one the page leaves to the reader. The output is biodegradable packaging and degradable packing material, a practical alternative of plastic packaging. It supports reuse cartons and paper recycling. That sentence is about the material story, not about the packing method, and it matters for customers who ask about plastic.
What the page does not do is prescribe a packing method. The description of the output use is broad because the material is broad. A buyer who reads the sentence as a list of options rather than a set of rules will find the output fits more products than the sentence suggests.
Aircosan machines use overload protection, so when a jam occurs, the machine stops automatically and protects the motor. Aircosan machines have side sheet metal that fits tightly with no gaps, so paper dust cannot enter the gears and cause abnormal noise or long-term wear. Aircosan machines use a branded motor with ample power, so thick and hard cardboard feeds smoothly without repeated jamming at the inlet. Aircosan shafts are large, one-piece units rather than thin blades, designed for a service life of over five years and processed through lathe machining, high-frequency treatment, quenching, blackening, and multiple other steps. The material is 40Cr rather than ordinary 45# steel. 40Cr has lower brittleness and stronger impact resistance, and its machining time is more than twice that of 45#. At the same 550mm width, Aircosan shafts are visibly larger and thicker than thinner competing units and cost about 30% more, which shows in the overall machine weight. Die life is generally 1.0 to 1.3 million meters depending on material and usage.
Aircosan runs its own parts processing factory, controlling part quality in-house rather than assembling from mixed outside sources. The company supports logo customization from one piece and color customization from ten pieces. Products carry CE, ROHS, and UKCA certifications and hold an exclusive EU patent. After-sales responds within 12 hours and connects customers directly with engineers.
For a packing supervisor, the practical approach is to pack ten orders with mesh, ten with strips, and ten with the model that produces both. The comparison shows which use fits the product mix, and the page has already described the options.