Leased warehouse space comes with constraints that owned space does not. The lease specifies what can be installed, what can be modified, and what must be restored at the end of the term. The landlord has an interest in keeping the space flexible for the next tenant, and that interest affects what the current tenant can do.
Installing equipment in a leased space requires planning around those constraints. A honeycomb paper machine fits within most lease constraints because it is compact, it does not require building modifications, and it can be removed without leaving damage.
What Leases Typically Require
The first thing a lease typically requires is that the tenant not make structural modifications without the landlord's approval. A machine that bolts to the floor may require approval, because the bolts leave holes when the machine is removed.
The second thing a lease typically requires is that the tenant restore the space at the end of the term. A machine that leaves marks on the floor or damage to the walls creates a restoration cost.
The third thing a lease typically requires is that the tenant maintain insurance coverage for the equipment and for any damage it causes. A machine that is certified is easier to insure than one that is not.
Why the Machine Fits Lease Constraints
A honeycomb paper machine fits lease constraints because it is compact. A footprint of just over 1 cubic meter, dimensions around 950x1150x1260mm and net weight near 502kg, means the machine does not require a dedicated room or a structural modification. It sits on the floor, and it can be moved when the lease ends.
The machine runs on standard AC220V/50HZ at 1.5kW total power, with no compressor, heating element, or adhesive system. That simplicity means the installation does not require electrical work beyond connecting to an existing circuit. A tenant that installs a machine requiring a dedicated circuit has to negotiate that work with the landlord. A tenant that installs a machine that runs on standard power does not.
How to Plan the Installation
The practical approach is to confirm three things before installing. First, confirm that the floor can support the machine's weight. A standard concrete floor in a warehouse meets the requirement. Second, confirm that the power supply is available and adequate. The machine draws 1.5kW, which is within the capacity of a standard circuit.
Third, confirm the machine's placement with the landlord. A machine that sits against a wall or in a corner is less likely to raise concerns than a machine that blocks a passage or a loading door.
What Happens at the End of the Lease
A honeycomb paper machine can be removed at the end of the lease without leaving damage. The machine sits on the floor rather than being bolted to it, so removing it leaves the floor intact. The power connection is a standard plug, so disconnecting it does not require an electrician.
The machine can be moved to a new location, which means the investment carries forward when the lease ends. A machine that is bolted to the floor or integrated into the building cannot be moved as easily, and the investment is tied to the location.
What the Machine Delivers
A honeycomb paper machine that fits leased space delivers output without tying the tenant to the building. Die-cutting speed is adjustable between 5 and 18 m/min, and die-cutting width is adjustable between 200 and 500mm. Suitable paper is ≤80gsm, and both virgin kraft paper and recycled paper work.
A paper roll length of about 1700m, with a maximum unwind diameter of 500mm and a paper core inner diameter of 75mm, supports a long production run before the roll needs to be changed. A die that lasts about 1.0~1.3 million meters keeps the cells uniform across the entire run.
The output is biodegradable packaging and degradable packing material, a practical alternative to plastic packing materials, and it supports reuse cartons and paper recycling. For a tenant in leased space, the portability of that output is as important as the output itself.