A cardboard shredder does not pay for itself in every facility. It pays where three conditions line up: a steady stream of clean used board, a protection requirement that mesh cushioning can meet, and enough packing volume that purchased void fill is a real line item. The five profiles below meet all three.
Furniture delivery is the first. Wardrobes, large coffee tables and flat-pack cabinetry arrive in cartons whose side panels routinely exceed 80 cm. Those panels are clean double-wall board, and they are ideal mesh material once expanded. The protection problem is corner and edge damage during multi-drop delivery, which mesh cushioning handles well because it wraps rather than pads. The complication is width. A standard 55 cm machine forces pre-cutting on every large panel, which is exactly the labor the shredder was meant to remove. This is the profile that justifies the P120, with its 120 cm working width, 20 mm thickness ceiling and 12 m/min feed, processing full panels in a single pass. It is currently the widest machine available on the market, and Aircosan builds it in Dongguan alongside the rest of the range.
Glass and ceramics come second. Flat glass panels, curtain wall units, large glass containers, toilets, bathtubs, washbasins and ceramic art pieces all need surface protection without abrasion. Paper strips are well suited to this because they do not scratch and do not generate static that attracts dust. The PT50 produces strip output at 55 cm width, 15 mm thickness and 18 m/min, and the flat strips wrap edges and separate stacked items cleanly. Compared with foam, strips compress less permanently under load and can be recycled with the packaging.
Automotive and industrial parts form the third profile. Engine cylinder blocks, transmission housings, brake drums, chassis components, plus bolts, nuts, washers and screws all present the same problem: heavy, sharp-edged items that must not contact each other in transit. Mesh cushioning separates them and absorbs shock. The P80 handles board up to 20 mm thick at 15 m/min, which covers the heavy triple-wall stock that equipment crates generate. The segregation discipline matters here clean heavy board in one stack, contaminated board in the baler and once established it turns a disposal cost into a packaging input.
Electronics and control cabinets are the fourth. Server racks, industrial control cabinets and precision instruments need corner protection and void fill in volume, and they ship in cartons that are themselves large and clean. The P50-3 splits one sheet into three equal mesh streams at 18 m/min, which allows a single machine to supply three packing benches without a queue. For facilities where the bottleneck is waiting for fill rather than cutting speed, three-way output changes the arithmetic more than a faster single-stream unit.
Export packers and packaging service companies are the fifth. These operations face customers who increasingly refuse plastic void fill and ask for documented paper-based packaging. A shredder gives them a defensible answer, because the cushioning is visibly made from recycled board on site. The P50-X produces both mesh and strip from one machine, which suits service companies handling varied client requirements without maintaining separate inventories.
Across all five, the underlying logic is the same. The machine is a one-time capital cost. The material is waste already in the building. The saving compounds monthly against purchased bubble wrap, air pillows or foam. Aircosan manufactures in Dongguan with full in-house machining, from the desktop P10 at 35 cm to the P120 at 120 cm, and the reason the range extends that far is that the first profile furniture, glass, large equipment is also the one where a too-narrow machine gets abandoned fastest.