Not every packaging operation runs at industrial volume. A small ceramic studio, a craft workshop, or a boutique retailer may only need cushioning material a few times a day. For these users, the manual feed method is the most practical approach. The Aircosan P10 cardboard shredder is a desktop model designed for exactly this use. It has a cutting width of 35cm, a maximum cutting thickness of 10mm, and a cutting speed of 10 m/min. An operator feeds one carton at a time, and the machine produces a mesh that wraps and cushions ceramic pieces.
The manual feed method gives the operator full control. You decide when to run the machine, how much material to produce, and how thick the input board should be. There is no need to build up a stock of cushioning material in advance. You produce what you need for the day's orders, which saves storage space and reduces waste. For a small studio packing handmade bowls, cups, and decorative pieces, this is a workable system.
Aircosan is a factory with deep technical research and development capability, not a trading company. We build shredders up to 120cm cutting width, and the P10 uses the same cutter shaft and perforating head engineering that goes into our industrial models. That means the desktop unit is not a toy. It is a scaled version of the same platform, built to hold up under daily use.
The manual feed method works well for small ceramic items because the operator can adjust the mesh as needed. A thin mesh for a small cup, a thicker mesh for a heavy bowl. The material itself is biodegradable packaging and degradable packing material, which is a practical alternative of plastic packing materials. It also supports reuse cartons and turn waste into packing materials.
Compare this to foam wrap or bubble wrap. Those materials are bought in bulk, stored, and then discarded. The P10 turns scrap cartons into cushioning on the spot, which reduces both material cost and waste.
The P10 suits small ceramic studios, craft workshops, boutique retailers, and home-based businesses. It is a cardboard shredder machine that fits on a workbench and runs from a standard power supply.
Aircosan supports every P10 unit with factory-level technical service and a dedicated after-sales team.