Ceiling height is a constraint that is easy to overlook until a machine arrives and does not fit. A warehouse with low ceilings, a mezzanine, or a basement packing area all have limited vertical clearance, and the limit affects what equipment can be installed.
The HM50-M is designed for these spaces. The machine measures 950×1150×1260mm, with the height being the third dimension. The machine does not require vertical clearance above that height, and the compact profile is what makes it practical in low-ceiling facilities.
Why Ceiling Height Matters
Ceiling height matters because some equipment needs vertical space. A machine with a tall hopper, a vertical conveyor, or an overhead crane requires clearance that a low-ceiling facility does not have.
The HM50-M has none of these features. The paper roll is loaded from the side, and the machine's height is the roll's maximum unwind diameter plus the frame. The maximum unwind diameter is 500mm, so the vertical requirement is modest.
What the Compact Height Enables
The compact height enables the machine to be installed in spaces that other equipment cannot use. A mezzanine with a low ceiling can hold the machine. A basement packing area can hold the machine. A corner that is too low for a tall machine can hold the machine.
The compact height also makes the machine easier to install. The machine does not need a crane or a forklift to position it, because the machine is light enough for a small team to move. The net weight is 502kg, and the gross weight is 552kg.
How the Machine Fits the Space
The machine has a footprint of just over 1 cubic meter, and the height is within the range of a standard packing area. The combination of the small footprint and the compact height is what makes the machine fit spaces that other equipment cannot use.
The machine runs on standard AC220V/50HZ at 1.5kW total power, with no compressor, heating element, or adhesive system. The power requirement is what makes the machine practical in a low-ceiling facility where dedicated circuits may not be available.
What the Operator Needs
The operator needs space to stand beside the machine and to reach the controls. The controls are grouped on the panel, and the panel is at a height that the operator can reach without bending or stretching.
The operator also needs space to load the paper roll. The roll is loaded from the side, and the space beside the machine is what allows the loading to happen.
Where the Machine Fits
The HM50-M suits facilities with limited ceiling height. Mezzanines, basements, and older warehouses all have low ceilings, and the machine's compact height is what makes it practical in those spaces.
The machine has a footprint of just over 1 cubic meter, supports 50cm diameter small rolls, and can sit beside a packing bench. The compact size is part of what makes the machine practical in facilities where space is limited.
For operations that are evaluating the machine, the practical question is whether the ceiling height allows the machine to be installed. In most packing facilities, the answer is yes, and the compact height is what makes the answer possible.