Most packing benches carry too much inventory. Bubble wrap in two widths, foam sheets, air pillows, loose fill, edge protectors - each bought for a specific product, each taking shelf space, each running out at the worst moment. The root cause is that one shape of cushioning cannot fit every product. A flat glass panel, a curved ceramic basin, and a square server cabinet need different protection, so the bench accumulates materials instead of solving the problem.


A cardboard shredder with dual output changes that equation. Mesh blades cut a lattice pattern into flat corrugated board; when stretched, the sheet opens into a three-dimensional structure that wraps curves, cushions flat faces, and fills voids. Strip blades cut continuous bands that run along edges, bundle parts, and secure corners. Both come from the same waste cartons, produced on demand at the bench.


Aircosan builds the P50-X for exactly this split. It runs a 55 cm cutting width, 12 mm maximum thickness, and 15 meters per minute, and it can produce mesh and strip material from one machine. The cutting shafts are machined in-house in Dongguan from 40Cr steel with interlocking blade arrangements, the same architecture used across the range, so output structure stays consistent whether the machine is a desktop unit or an industrial model. Aircosan also builds units up to 120 cm cutting width, a size rarely seen on the market, so large boards go in without pre-cutting.


The practical effect is fewer materials on the shelf. A plant shipping electronics, instruments, and control cabinets uses mesh to wrap and cushion irregular housings and strip to secure rack edges. A furniture workshop wraps tabletop corners with strip and pads drawer fronts with mesh. A glass supplier runs strip along pane edges and uses mesh between stacked units. One machine, one raw material, two output shapes, and the bench stops accumulating half-used rolls.


There is a cost argument underneath. Every meter of mesh or strip made on site replaces purchased filler, and the raw material was already a disposal cost. Paper cushioning is biodegradable and recyclable, which answers the plastic-reduction questions export customers now ask with increasing regularity. For operations weighing whether to add a second packing material or replace the first, a dual-output cardboard shredder usually settles the question - it does the job of both without adding inventory.


If you want to test the approach, start with a desktop model and a single product line. If the bench handles mixed shapes and steady volume, the P50-X covers the range. Aircosan is a Dongguan factory rather than a trading company, so shafts, frames, and service come from the people who build the machine, and technical support reaches the production floor directly.