Export packaging is a different problem from domestic shipping. A crate may be handled by forklifts, stacked three high in a container, and spend weeks in transit across climates. The protection inside has to hold up under that load, and the materials commonly used do not always cooperate. Bubble wrap compresses and loses volume. Foam crushes at contact points. Loose fill migrates to the bottom of the crate, leaving the top of the product unprotected.


Heavy machinery makes this worse. A machine tool, a pump assembly, or a large industrial component has hard contact points and often a painted or machined surface that cannot be scratched. Packing teams need cushioning that holds thickness under weight, wraps irregular shapes, and separates surfaces to prevent abrasion. Expanded corrugated mesh does all three. A cardboard shredder cuts a lattice pattern into flat board, and when the sheet is stretched, it opens into a springy three-dimensional structure that compresses and recovers under load.


Aircosan builds these machines in Dongguan for exactly this kind of duty. The industrial range steps up in thickness and width to handle the board that heavy export crating generates. The P80 runs a 55 cm cutting width, 20 mm maximum thickness, and 15 meters per minute, covering double and triple-wall corrugated common in industrial shipping. The P90 widens the cut to 90 cm at the same 20 mm thickness and 12 meters per minute, so large boards go in without trimming. Aircosan also produces units up to 120 cm cutting width, a size rarely seen on the market, which suits operations that receive full sheets and want to avoid a pre-cutting step.


The packing line benefits in concrete ways. Mesh material wraps a pump housing or gearbox and holds its position without tape. Strip material runs along crate edges and bundles fittings. Because both outputs come from waste board generated on site, the packing line is not dependent on filler deliveries, and the waste pile that used to consume floor space becomes the input for the next shipment. For exporters, paper cushioning also answers a compliance question: it is biodegradable and recyclable, which aligns with the plastic-reduction requirements that overseas buyers increasingly write into contracts.


Aircosan manufactures in Dongguan with in-house shaft and frame production, using the same interlocking blade architecture across the range, so output quality is consistent from the smallest desktop unit to the widest industrial model. Because the company is a factory rather than a trading company, export packers can discuss board thickness, crate dimensions, and throughput directly with the people who build the equipment. That conversation usually determines whether the machine fits the line or becomes a bottleneck- and for export operations where a damaged shipment costs far more than the equipment, getting that fit right is the whole point.