An electronics plant packing server cabinets and industrial control cabinets deals with large, heavy, and sensitive equipment. These units contain precision instruments, circuit boards, and sensors that cannot tolerate impact or vibration. Foam and molded inserts work but are expensive and slow to source. The Aircosan P80 cardboard shredder provides an on-site alternative. It has a cutting width of 55cm, a maximum cutting thickness of 20mm, and a cutting speed of 15 m/min. It produces a heavy-duty mesh from waste cartons that cushions corners and separates panels.
In this plant setting, the mesh is used for corner protection, void fill, and panel separation. The 20mm cutting thickness handles the heavier corrugated board that electronics manufacturers often have on hand. The machine runs at 15 m/min, which is fast enough to keep up with a packing line without creating a bottleneck. The operator produces material as units come off final test, so supply matches demand.
Aircosan is a factory with deep technical research and development capability. We build shredders up to 120cm cutting width, and the P80 uses the same cutter shaft and perforating head platform as our industrial models. The cutter shaft is precision machined, and the perforating head is built for long service life. For a plant running daily production, that reliability is essential.
The material is biodegradable packaging and degradable packing material. It is a practical alternative of plastic packing materials, and it supports reuse cartons and paper recycling. For electronics exporters facing plastic restrictions, this is a compliance advantage.
The P80 suits server cabinet manufacturers, industrial control cabinet producers, electronics exporters, and packaging service companies. It is a protective packaging machine that integrates into a plant packing line.
Aircosan supports the P80 with factory-level technical service and a dedicated after-sales team.